DJI drones are popular for their advanced features and capabilities, but if you’re new to flying one, turning it on can be a bit confusing. The process may vary slightly depending on the model you have, but the basic steps are relatively similar across the board. In this guide, we’ll walk you through the steps to turn on your DJI drone so you can start capturing stunning aerial footage.
Before you begin, make sure your DJI drone is fully charged and that the remote controller is also powered up and connected. It’s important to follow the manufacturer’s instructions carefully to ensure a safe and successful flight.
Step-by-step guide to turn on your DJI drone
Turning on your DJI drone is a simple process that involves a few steps. Follow the guide below to power up your drone:
| Step 1: | Check the battery level of your drone and the remote controller. Make sure they are adequately charged. |
| Step 2: | Place your drone on a flat surface, away from any obstacles or people. |
| Step 3: | Press and hold the power button on your drone until you see the lights turn on. |
| Step 4: | Turn on the remote controller by pressing and holding its power button. |
| Step 5: | Wait for the drone and remote controller to establish a connection. You will see a solid light on both devices when they are paired. |
| Step 6: | Your DJI drone is now powered on and ready to fly. Follow the instructions in the user manual to start flying safely. |
Locate the power button
Before turning on your DJI drone, you need to locate the power button. The location of the power button may vary depending on the model of your drone, but it is usually located on the top or side of the drone.
Once you have located the power button, press and hold it for a few seconds until you see the lights on the drone start to blink or hear a beep sound. This indicates that the drone is powering on.
Press and hold the power button
To turn on your DJI drone, locate the power button on the aircraft. Press and hold the power button for a few seconds until you see lights or hear a sound indicating that the drone is powering on. Once the drone is powered on, you can proceed with the necessary pre-flight checks and settings before taking off.
Wait for the drone to power up
Once you have inserted the battery into your DJI drone and pressed the power button, you will need to wait for the drone to power up. This process may take a few moments as the drone initializes its systems and prepares for flight.
During this time, make sure the drone is on a flat surface and is not moving. It’s important to allow the drone to complete its power-up sequence without any interruptions to ensure safe and proper operation.
Check the battery level
Before turning on your DJI drone, it’s important to check the battery level to ensure you have enough power for your flight. Here’s how you can do it:
- Make sure the battery is properly inserted into the drone.
- Press the power button on the battery to check the current charge level. The LED lights on the battery will indicate the remaining power.
- If the battery is low, consider charging it before your flight to avoid any interruptions.
Connect your remote controller
To turn on your DJI drone, you need to connect the remote controller first. Follow these steps:
- Make sure the remote controller is fully charged.
- Turn on the remote controller by pressing and holding the power button.
- Check if the LED lights on the remote controller are on.
- Next, locate the power button on your drone and press it to turn on the drone.
- Wait for the drone to establish a connection with the remote controller.
- Once the connection is established, you are ready to fly your DJI drone.
Calibrate the drone before takeoff
Before taking off your DJI drone, it is essential to calibrate it properly to ensure stable flight and accurate performance. Follow these steps to calibrate your drone:
- Place the drone on a flat surface: Make sure the surface is level and free from any obstructions.
- Turn on the drone: Power on the drone and remote controller.
- Access the calibration settings: Navigate to the drone’s settings menu on the controller.
- Select the calibration option: Choose the calibration option for the IMU (Inertial Measurement Unit) or compass.
- Follow the on-screen instructions: Follow the prompts on the screen to complete the calibration process. This may involve rotating the drone in specific directions.
- Complete the calibration: Once the calibration is finished, restart the drone and ensure all systems are functioning correctly.
By calibrating your drone before takeoff, you can improve its stability, accuracy, and overall performance during flight.
FAQ
How do I turn on my DJI drone?
To turn on your DJI drone, first make sure the battery is fully charged. Then, unfold the drone and place it on a flat surface. Press and hold the power button on the drone until you see the lights come on and hear a beep. Your DJI drone should now be turned on and ready to fly.
What should I do if my DJI drone doesn’t turn on?
If your DJI drone doesn’t turn on, first check the battery to ensure it is properly connected and charged. If the battery is fine, try a different power source or charging cable. If the issue persists, contact DJI customer support for further assistance.
Can I turn on my DJI drone without a remote control?
Most DJI drones require a remote control to be turned on. However, some models may have a power button on the drone itself that can be used to turn it on without the remote control. Refer to your drone’s user manual for specific instructions on how to turn it on without a remote control.
How long does it take to turn on a DJI drone?
The time it takes to turn on a DJI drone can vary depending on the model and battery charge. On average, it takes about 5-10 seconds for the lights to come on and the drone to be ready for flight after pressing the power button. However, if the battery is low or there are any issues, it may take longer to turn on the drone.
