Yi Dome Security Camera is a popular choice for home security, but sometimes you may encounter issues that require a reset. Whether you’re experiencing connectivity problems or just want to start fresh, resetting your camera can help resolve these issues.
Resetting the Yi Dome Security Camera is a straightforward process that can be done in a few simple steps. This guide will walk you through the steps to reset your camera and get it back up and running smoothly.
By following the instructions in this article, you’ll learn how to reset your Yi Dome Security Camera and troubleshoot common issues that may arise. Let’s get started!
Resetting Yi Dome Security Camera: Step-by-Step Guide
If you need to reset your Yi Dome security camera, follow these simple steps to restore it to its factory settings:
Step 1: Locate the Reset Button
Find the reset button on your Yi Dome security camera. It is typically located on the bottom or back of the camera.
Step 2: Press and Hold the Reset Button
Using a small tool like a paperclip or toothpick, press and hold the reset button for about 10 seconds until you see the camera’s status light blink.
After completing these steps, your Yi Dome security camera should be successfully reset to its default settings. Remember to reconfigure any settings or connections as needed.
Powering Off the Camera
To power off the Yi Dome security camera, follow these steps:
- Locate the power adapter connected to the camera.
- Unplug the power adapter from the power outlet.
- Wait for the camera to completely power down. This may take a few moments.
Once the camera has powered off, you can safely move on to the next steps in resetting the camera or performing any maintenance tasks.
Pressing the Reset Button
If you need to reset your Yi Dome security camera, you can do so by pressing the reset button located on the camera itself. Follow these steps to reset your camera:
Steps to Reset Yi Dome Security Camera:
| 1. | Locate the reset button on your Yi Dome security camera. |
| 2. | Using a small, pointed object such as a paperclip, press and hold the reset button for about 10 seconds. |
| 3. | Release the reset button after 10 seconds, and your camera will reset to its factory settings. |
After resetting your Yi Dome security camera, you will need to set it up again and reconfigure any settings as needed.
Holding the Reset Button
To reset your Yi Dome security camera, you will need to locate the reset button on the camera itself. The reset button is usually a small, recessed button that can be pressed with a paperclip or a similar tool.
Here are the steps to reset your Yi Dome security camera:
- Power Off: Make sure the camera is powered off before proceeding with the reset.
- Locate Reset Button: Find the reset button on the camera. It is typically located near the power port or on the bottom of the camera.
- Press and Hold: Use a paperclip or a similar tool to press and hold the reset button for about 10 seconds.
- Release Button: After 10 seconds, release the reset button. The camera will now reboot and reset to its factory settings.
- Set Up Again: Once the camera has reset, you will need to set it up again using the Yi Home app or the camera’s setup process.
By following these steps and holding the reset button on your Yi Dome security camera, you can easily reset the camera and start fresh with the setup process.
Releasing the Reset Button
After pressing and holding the reset button for about 10 seconds, release the button once you see the LED light on the camera start flashing. This indicates that the camera has been reset to its default settings. Make sure to wait for the camera to reboot before attempting to reconnect it to your network.
Powering On the Camera
To reset your Yi Dome security camera, start by powering on the camera. Follow these steps:
- Plug the camera into a power source using the provided power adapter.
- Wait for the camera to boot up, indicated by a blinking status light.
- If the camera does not power on, ensure that the power source is working properly and try a different outlet.
Setting Up the Camera Again
Once you have reset your Yi Dome security camera, you will need to set it up again to start using it. Follow these steps to get your camera up and running:
- Download the Yi Home app on your smartphone or tablet.
- Open the app and log in to your account.
- Tap on the “Add Camera” option in the app.
- Follow the on-screen instructions to connect your camera to your Wi-Fi network.
- Scan the QR code on the camera to pair it with your account.
- Choose a location for your camera and set up any specific preferences or settings.
- Once the camera is successfully set up, you can start monitoring your space.
