Feit Electric is a well-known brand that offers a range of security cameras, including flood light security cameras. These cameras provide an added layer of security to your home or business, allowing you to monitor your property remotely. However, like any electronic device, there may be times when you need to reset your Feit flood light security camera.
Resetting your Feit flood light security camera can help resolve issues such as connectivity problems, camera malfunctions, or forgotten passwords. If you find yourself in a situation where your camera is not working as it should, a reset may be the solution.
In this article, we will guide you through the steps to reset your Feit flood light security camera, ensuring that you can continue to monitor your property with peace of mind.
Steps to Reset Feit Flood Light Security Camera
Resetting your Feit flood light security camera can help resolve various issues and restore it to its original settings. Follow these steps to reset your Feit flood light security camera:
- Locate the reset button on the camera. It is usually a small button that may require a paperclip or similar tool to press.
- Press and hold the reset button for about 15-20 seconds until you see the camera’s LED indicators flash or hear a beep sound.
- Release the reset button and wait for the camera to reboot. This may take a few minutes.
- Once the camera has rebooted, you can set it up again by following the manufacturer’s instructions for initial setup.
- Ensure to reconfigure any settings, such as Wi-Fi connection, motion detection, or recording preferences, as needed.
By following these steps, you can successfully reset your Feit flood light security camera and troubleshoot any issues you may be experiencing.
Locate the Reset Button
Before resetting your Feit floodlight security camera, you need to locate the reset button on the device. The reset button is usually a small hole that can be found on the camera body or on the back panel. You may need to use a paperclip or a similar tool to press the reset button. Refer to the user manual for the exact location of the reset button on your specific model.
Press and Hold the Reset Button
To reset your Feit flood light security camera, locate the reset button on the device. This button is usually small and recessed to prevent accidental presses. Use a paperclip or a similar small tool to press and hold the reset button for about 10-15 seconds. You may need to use some force to ensure the button is fully engaged.
While holding the reset button, you may see the camera’s lights flash or hear a beep, indicating that the reset process has started. Continue to hold the button until the lights stop flashing or the camera emits a long beep, which signifies that the reset is complete.
Once the reset is finished, the camera will reboot and return to its factory settings. You will need to set up the camera again using the initial setup process. Make sure to reconfigure any settings and preferences to suit your needs after the reset.
Wait for the Camera to Reset
After completing the reset process, give your Feit flood light security camera some time to reboot and reset all its settings. This may take a few minutes, so be patient and allow the camera to finish the reset process.
Once the camera has fully reset, you can proceed with setting it up again according to the manufacturer’s instructions. Make sure to follow the setup steps carefully to ensure that your camera is functioning properly and providing you with the security you need.
Check the Camera’s Status Light
Before resetting your feit flood light security camera, it’s important to check the camera’s status light to determine if it is functioning properly. The status light on the camera will indicate its current state and whether it is ready for a reset.
To check the status light, locate the camera on your property and look for a small LED light that may be located on the front or back of the camera. The status light may be solid, blinking, or off, depending on the camera’s current state.
If the status light is solid, it indicates that the camera is powered on and functioning normally. If the light is blinking, it may indicate an issue with the camera’s connection or setup. If the light is off, it could mean that the camera is not receiving power or is not functioning at all.
By checking the camera’s status light, you can determine if a reset is necessary and troubleshoot any issues that may be affecting the camera’s performance.
Reconnect the Camera to Your Network
Once the camera has been reset, you will need to reconnect it to your network to start using it again. Follow these steps to reconnect your feit flood light security camera:
| 1. | Launch the camera’s app on your smartphone or tablet. |
| 2. | Follow the on-screen instructions to add a new device. |
| 3. | Scan the QR code on the camera or enter the camera’s serial number to identify it. |
| 4. | Connect the camera to your Wi-Fi network by entering your network’s SSID and password. |
| 5. | Wait for the camera to connect to your network successfully. |
| 6. | Once connected, you can start using your feit flood light security camera as usual. |
Re-Add the Camera to Your App
If you have reset your Feit flood light security camera and need to re-add it to your app, follow these steps:
- Open the app on your mobile device.
- Go to the camera settings or device management section.
- Select “Add a new camera” or a similar option.
- Follow the on-screen instructions to connect your camera to the app.
- Make sure to input the correct Wi-Fi network information and password.
- Wait for the camera to connect to the app and complete the setup process.
- You may need to scan a QR code or enter a specific code to pair the camera with the app.
- Once the pairing is successful, you should be able to access the camera’s live feed and settings through the app.
By re-adding the camera to your app, you can regain control and monitoring capabilities of your Feit flood light security camera after resetting it.
Test the Camera’s Functionality
Once you have successfully reset your Feit flood light security camera, it’s important to test its functionality to ensure that it is working properly. Follow these steps to test the camera:
1. Check the Camera’s Power Source
Make sure that the camera is properly connected to a power source and that the power supply is working correctly. Check for any loose connections or damaged cables that may be affecting the camera’s power.
2. Monitor the Camera’s Feed
Access the camera’s live feed through the Feit Electric app or the designated monitoring platform. Ensure that the camera is capturing clear video footage and that the feed is stable without any interruptions.
| Test | Result |
| Motion Detection | Walk in front of the camera to test if motion detection is working properly. |
| Night Vision | Check the camera’s night vision capabilities by testing it in low-light conditions. |
| Two-Way Audio | Verify if the two-way audio feature allows you to communicate through the camera. |
Update the Camera’s Firmware
If your Feit flood light security camera is not functioning properly, it may be due to outdated firmware. Updating the camera’s firmware can help resolve many issues and improve its overall performance. Here is a step-by-step guide to update the firmware:
Step 1: Check for Updates
Start by checking the Feit website or the camera’s official app for any available firmware updates. Make sure to download the latest version of the firmware.
Step 2: Install the Update
Follow the instructions provided by Feit to install the firmware update on your camera. This typically involves connecting the camera to a computer or smartphone and running the update software.
Important: Make sure not to interrupt the update process as it can cause damage to the camera.
After the update is complete, restart the camera and check if the issues have been resolved. If the problems persist, you may need to contact Feit customer support for further assistance.
Troubleshoot any Issues
If you encounter any issues while resetting your Feit flood light security camera, here are some troubleshooting tips to help you:
- Check the power source: Ensure that the camera is properly connected to a power source and that the power outlet is working.
- Reset the camera: If the camera is not responding to the reset process, try resetting it again following the manufacturer’s instructions.
- Check the Wi-Fi connection: Make sure that your camera is connected to a stable Wi-Fi network with a strong signal.
- Update the firmware: Check if there are any firmware updates available for your camera and install them to resolve any software-related issues.
- Contact customer support: If you have tried all the troubleshooting steps and still experience issues, reach out to Feit customer support for further assistance.
