Is the back camera lens on your iPhone 7 Plus cracked or damaged? Instead of replacing the entire camera module, you can opt to replace just the lens cover. This DIY project can save you time and money, and with the right tools and instructions, you can do it yourself at home.
In this comprehensive guide, we will walk you through the process of replacing the back camera lens on your iPhone 7 Plus. From gathering the necessary tools to the step-by-step instructions, you’ll learn everything you need to know to successfully replace the lens cover and restore your phone’s camera to its original quality.
Step-by-step guide on replacing iPhone 7 Plus back camera lens
If you’ve noticed scratches or cracks on your iPhone 7 Plus back camera lens, you can easily replace it yourself with the right tools and a bit of patience. Follow these steps to successfully replace the back camera lens:
Step 1: Gather the necessary tools, including a replacement camera lens, a small Phillips screwdriver, tweezers, a plastic prying tool, and a suction cup.
Step 2: Power off your iPhone 7 Plus and remove the two screws located on either side of the charging port with the screwdriver.
Step 3: Place the suction cup near the bottom of the phone’s screen and gently lift the screen assembly. Use the plastic prying tool to carefully separate the screen from the frame.
Step 4: Locate the back camera module at the top of the phone and unscrew the small Phillips screws holding it in place. Use the tweezers to disconnect the camera connector from the motherboard.
Step 5: Carefully remove the damaged camera lens and replace it with the new one. Ensure it is secured in place and reattach the camera connector and screws.
Step 6: Reattach the screen assembly to the frame, making sure all the clips are securely in place. Secure the two screws near the charging port.
Step 7: Power on your iPhone 7 Plus and test the new camera lens to ensure it is functioning correctly.
Congratulations, you have successfully replaced the back camera lens on your iPhone 7 Plus!
Preparation and tools needed
Before starting the process of replacing the iPhone 7 Plus back camera lens, it is important to gather all the necessary tools and prepare your workspace. Here is a list of tools you will need:
Tools:
- Small Phillips screwdriver
- Flathead screwdriver
- Plastic opening tools
- Tweezers
- Suction cup
- Replacement camera lens
Make sure to work in a well-lit area with a clean and flat surface to prevent any damage to the components. Take your time and be gentle while following the steps to avoid any mishaps during the repair process.
Step 1: Back up your iPhone data
Before attempting to replace the back camera lens on your iPhone 7 Plus, it is essential to back up all your data to prevent any potential loss during the repair process.
Backup options:
– iCloud Backup: Go to Settings > [Your Name] > iCloud > iCloud Backup and tap “Back Up Now”.
– iTunes Backup: Connect your iPhone to your computer, open iTunes, select your device, and click on “Back Up Now”.
Make sure your backup is up to date so you can restore your data if needed after replacing the camera lens.
Step 2: Gather necessary tools and replacement parts
Before starting the replacement process, make sure you have all the required tools and replacement parts ready. Here is a list of items you will need:
- Replacement camera lens: Make sure you have the correct replacement camera lens for your iPhone 7 Plus model.
- Prying tool: To safely open the back cover of your iPhone.
- Screwdriver set: For removing the screws holding the back cover in place.
- Cloth or microfiber towel: To keep your work area clean and prevent scratches on your device.
- Tweezers: For handling small parts and screws with precision.
- Adhesive strips or glue: To secure the new camera lens in place.
Make sure you have all these tools and parts ready before proceeding with the replacement process.
Step 3: Remove the iPhone 7 Plus back cover
Once you have removed the screws and the adhesive strip, gently lift the back cover of the iPhone 7 Plus using a suction cup or a plastic opening tool. Be careful not to apply too much pressure to avoid damaging the cover or the phone.
Slowly slide the tool along the edges of the back cover to loosen it from the adhesive holding it in place. Make sure to work carefully and patiently to prevent any cracks or breaks in the cover.
Once the back cover is loosened, you can carefully lift it off the phone and set it aside. Be mindful of any cables or components attached to the cover as you remove it.
With the back cover removed, you now have access to the internal components of the iPhone 7 Plus, including the back camera lens that you need to replace.
Step 4: Disconnect the old camera lens
Before removing the old camera lens, you need to disconnect it from the iPhone 7 Plus. Here’s how to do it:
- Remove the screws: Using a screwdriver, carefully remove the screws that secure the camera lens module in place.
- Disconnect the connector: Gently disconnect the connector that attaches the camera lens to the motherboard of the iPhone.
Once you have disconnected the old camera lens, you can proceed to install the new camera lens following the previous steps.
Step 5: Install the new camera lens
1. Take the new camera lens and carefully place it in the opening on the back of the iPhone 7 Plus.
2. Gently press down on the lens to secure it in place, making sure it sits flush with the device.
3. Once the lens is properly aligned and in position, reattach the screws that hold the lens in place using the screwdriver.
4. Make sure the lens is securely fastened before proceeding to test the camera.
Step 6: Reconnect the camera module
Now that the new camera lens is in place, carefully reconnect the camera module to the motherboard. Make sure the connections are secure and properly aligned.
Once the camera module is reconnected, gently place it back into its housing and reattach any screws or clips that hold it in place.
Double-check the connections and ensure everything is secure before proceeding to reassemble the iPhone 7 Plus.
Step 7: Reassemble the iPhone 7 Plus
After replacing the back camera lens, carefully reassemble your iPhone 7 Plus by following these steps:
- Insert the rear camera module back into the housing, making sure it sits securely.
- Reconnect the camera module flex cable to the logic board.
- Reinstall the metal bracket over the camera module and secure it with the screws.
- Place the wireless charging coil back in its position.
- Reconnect any other cables or components that were disconnected during the disassembly process.
- Place the rear cover back on the phone and secure it with the screws.
- Power on your iPhone 7 Plus to ensure the camera is functioning properly.
Once you have successfully reassembled your iPhone 7 Plus, you can enjoy using the new camera lens without any issues.
Step 8: Test the new camera lens
Once you have replaced the camera lens on your iPhone 7 Plus, it’s important to test the new lens to ensure it’s working properly.
Open the camera app on your phone and switch between the front and back cameras to check if the new lens is functioning correctly.
Take a few test photos and videos to see if the image quality is clear and the lens is focusing properly.
If everything looks good, then congratulations, you have successfully replaced the back camera lens on your iPhone 7 Plus!
