Is the rear camera lens on your iPhone 6s Plus cracked or scratched? It’s a common issue that can affect the quality of your photos. Fortunately, replacing the rear camera lens on your iPhone 6s Plus is a relatively straightforward process that you can do at home with the right tools and a little patience.
In this guide, we’ll walk you through the steps to replace the rear camera lens on your iPhone 6s Plus so you can get back to taking clear, crisp photos in no time.
Before you begin, make sure you have a replacement camera lens that is compatible with the iPhone 6s Plus model. You can purchase one online or from a reputable electronics store. Additionally, gather the necessary tools, including a small Phillips screwdriver, a plastic opening tool, and a hairdryer or heat gun.
Step-by-Step Guide to Replacing iPhone 6s Plus Rear Camera Lens
If you are experiencing issues with the rear camera lens of your iPhone 6s Plus, you may need to replace it. Follow these step-by-step instructions to replace the rear camera lens of your iPhone 6s Plus:
Step 1: Gather the Necessary Tools
Before you begin, make sure you have the required tools for the replacement process. You will need a small Phillips screwdriver, a plastic opening tool, and a new rear camera lens for the iPhone 6s Plus.
Step 2: Remove the Back Cover
Start by powering off your iPhone 6s Plus and removing the two screws located at the bottom of the device near the charging port. Use the plastic opening tool to carefully pry off the back cover of the phone.
Caution: Be gentle when removing the back cover to avoid damaging any internal components.
Continue with the remaining steps to complete the replacement process and restore your iPhone 6s Plus rear camera lens to full functionality.
Gather Necessary Tools and Replacement Parts
Before starting the replacement process, make sure you have all the necessary tools and replacement parts ready. Here is a list of items you will need:
| 1. Small Phillips screwdriver |
| 2. Small flathead screwdriver |
| 3. Tweezers |
| 4. Replacement rear camera lens |
| 5. Adhesive tape |
Make sure to work in a well-lit area with a clean, flat surface to prevent losing any small screws or parts during the replacement process.
Power Off Your iPhone 6s Plus
Before replacing the rear camera lens on your iPhone 6s Plus, make sure to power it off to avoid any potential damage or interference.
Here’s how you can power off your iPhone 6s Plus:
| 1. | Press and hold the Power button located on the right side of the device. |
| 2. | Slide the “Slide to power off” option that appears on the screen to turn off your iPhone. |
| 3. | Wait for the device to completely power down before proceeding with the camera lens replacement. |
Remove the Rear Panel
To begin replacing the iPhone 6s Plus rear camera lens, you first need to remove the rear panel of the device. Here are the steps to follow:
- Power off your iPhone 6s Plus before starting the disassembly process.
- Use a Pentalobe screwdriver to remove the two screws located at the bottom of the phone next to the charging port.
- Place a suction cup near the home button and gently pull to create a small gap between the display assembly and rear case.
- Insert a plastic opening tool or a spudger into the gap and carefully slide it along the edge to release the clips holding the rear panel in place.
- Once the clips are released, lift the rear panel up and away from the phone to remove it completely.
With the rear panel removed, you can now access the rear camera lens and proceed with replacing it. Be sure to keep track of the screws and parts you remove to ensure a successful reassembly later on.
Disconnect the Battery
Before starting the replacement process, make sure to disconnect the battery to avoid any potential electrical damage. To do this, you will need a pentalobe screwdriver to remove the screws holding the back cover in place. Once the screws are removed, carefully lift the back cover and locate the battery connector. Use a plastic spudger tool to gently disconnect the battery connector from the logic board. This step is crucial to ensure your safety and prevent any damage to the device during the camera lens replacement process.
Remove the Rear Camera Module
To replace the rear camera lens on your iPhone 6s Plus, you will first need to remove the rear camera module. Follow these steps to do so:
- Power off your iPhone and remove any accessories or cases.
- Use a Pentalobe screwdriver to remove the two screws located next to the Lightning connector.
- Place a suction cup near the home button and gently pull to create a small opening.
- Insert a plastic opening tool or a spudger into the opening and carefully pry the display assembly away from the rear case.
- Once the display assembly is detached, carefully lift it to a 90-degree angle, being careful not to damage the cables.
- Locate the rear camera module at the top of the device and disconnect the cable attached to it.
- Remove the screws securing the rear camera module in place.
- Gently lift the rear camera module out of its housing and set it aside.
With the rear camera module removed, you can now proceed to replace the camera lens following the appropriate steps.
Replace the Camera Lens
If you need to replace the camera lens on your iPhone 6s Plus, follow these steps carefully:
Step 1: Gather the Necessary Tools
Before you begin, make sure you have a replacement camera lens, a small Phillips screwdriver, a plastic opening tool, and a hairdryer or heat gun.
Step 2: Remove the Old Lens
Start by heating the edges of the old camera lens with the hairdryer or heat gun to soften the adhesive. Use the plastic opening tool to gently pry the old lens off the phone.
Caution: Be careful not to damage the camera module underneath the lens.
Once the old lens is removed, clean any remaining adhesive residue from the phone.
Reassemble the Rear Camera Module
Once you have successfully replaced the rear camera lens on your iPhone 6s Plus, it’s time to reassemble the rear camera module.
Step 1: Align the Camera Module
Carefully align the camera module with the housing on the back of the phone. Make sure the connectors are properly lined up before proceeding.
Step 2: Secure the Camera Module
Once the camera module is in place, gently press it down to secure it in the housing. Be cautious not to apply too much pressure to avoid damaging the module.
Note: Ensure all screws and components are properly reattached before closing up the phone.
Reconnect the Battery
Before reassembling your iPhone 6s Plus, it’s crucial to reconnect the battery to ensure proper functionality. Follow these steps:
- Locate the battery connector on the logic board.
- Gently reconnect the battery cable to the logic board connector.
- Ensure the connector is properly aligned and firmly seated.
- Once the battery is reconnected, you can proceed with reassembling your iPhone.
Replace the Rear Panel
To access the rear camera lens on your iPhone 6s Plus, you will need to remove the rear panel of the device. Follow these steps to replace the rear panel:
Step 1: Power Off
First, make sure your iPhone is powered off to avoid any electrical mishaps during the replacement process.
Step 2: Remove Screws
Use a pentalobe screwdriver to remove the screws located at the bottom of the iPhone near the charging port.
Caution: Keep track of the screws and their placement to ensure you can reassemble the device correctly.
Continue with the remaining replacement steps once the rear panel is successfully removed.
Power On Your iPhone 6s Plus and Test the Camera
After successfully replacing the rear camera lens on your iPhone 6s Plus, power on the device to test the camera functionality. Press the power button to turn on the iPhone and navigate to the camera app.
Important: Ensure that the camera lens is clean and free from any obstructions before testing.
Testing the Camera
Take a few test photos and videos to check the quality and focus of the camera. Verify that the camera is functioning properly without any issues such as blurriness or distortion.
If you notice any problems with the camera after replacement, double-check the installation and contact a professional if needed.
