If you’re experiencing issues with the rear camera on your iPhone 6s Plus, don’t worry – you can replace it yourself with a few simple tools and a bit of patience. Whether your camera is blurry, cracked, or not working at all, this guide will walk you through the process of replacing it.
Before you begin: Make sure you have a replacement rear camera that is compatible with the iPhone 6s Plus. You can purchase one online or from a reputable electronics store. Additionally, gather the necessary tools, such as a small Phillips screwdriver, a pentalobe screwdriver, and a plastic spudger.
Disclaimer: This guide is for informational purposes only. If you’re not comfortable with DIY repairs, it’s always best to seek professional help. Proceed at your own risk.
Tools Required for the Task
Before starting the replacement process, make sure you have the following tools handy:
| 1. Small Phillips screwdriver |
| 2. Plastic opening tools |
| 3. Tweezers |
| 4. Suction cup |
| 5. Spudger tool |
| 6. Replacement rear camera module |
Step-by-Step Guide to Disassemble iPhone 6s Plus
1. Power off the iPhone 6s Plus by holding down the power button and sliding to power off.
2. Remove the two screws located on either side of the lightning connector at the bottom of the phone using a pentalobe screwdriver.
3. Use a suction cup to lift the display assembly slightly and insert a plastic opening tool between the display assembly and the rear case.
4. Slide the plastic opening tool along the bottom edge of the iPhone to separate the display assembly from the rear case.
5. Lift the display assembly up from the rear case, but do not completely remove it as it is still connected by cables.
6. Remove the screws securing the metal plate covering the battery connector and disconnect the battery connector.
7. Remove the screws securing the metal plate covering the display connectors and disconnect the display connectors.
8. Gently lift the display assembly away from the rear case and set it aside.
9. Remove the screws securing the metal plate covering the rear camera connector and disconnect the rear camera connector.
10. Carefully lift the rear camera out of its housing in the rear case and replace it with a new one if needed.
Removing the Old Rear Camera
To replace the rear camera of your iPhone 6s Plus, you will need to start by removing the old camera module. Follow these steps carefully:
- Power Off: Make sure your phone is turned off before you begin any repairs.
- Remove Screws: Use a pentalobe screwdriver to remove the two screws located near the charging port.
- Separate Display: Use a suction cup to lift the display assembly slightly. Insert a plastic spudger tool between the display assembly and the rear case to separate them.
- Detach Connectors: Locate the rear camera connector on the logic board and gently disconnect it using a spudger tool.
- Remove Camera: Unscrew the two screws holding the camera module in place. Carefully lift the old camera out of its housing.
Once you have successfully removed the old rear camera, you can proceed with installing the new camera module following the reverse steps. Be sure to handle the delicate components with care to avoid any damage during the repair process.
Installing the New Rear Camera
Once you have removed the old rear camera, it’s time to install the new one. Follow these steps to successfully replace the rear camera on your iPhone 6s Plus:
Step 1: Align the New Camera
Take the new rear camera and carefully align it with the connector on the logic board. Make sure it is positioned correctly before proceeding to the next step.
Step 2: Secure the Camera
Gently press down on the camera to secure it in place. Make sure it sits flush with the housing and is not loose. Double-check the alignment and connections to ensure everything is properly fitted.
Important Note: Be cautious while handling the camera and its delicate components to avoid any damage during installation.
Testing and Calibrating the Camera
Once you have replaced the rear camera on your iPhone 6s Plus, it is important to test and calibrate the new camera to ensure it is functioning correctly. Here are some steps you can follow:
- Test the Camera: Open the camera app on your iPhone and take a few test photos and videos to check if the camera is working properly. Make sure the images are clear and there are no issues with focus or color.
- Calibrate the Camera: If you notice any issues with the camera quality, you can try calibrating the camera settings. You can adjust the focus, exposure, and white balance settings to improve the image quality.
- Use Camera Calibration Apps: There are various camera calibration apps available on the App Store that can help you calibrate your iPhone camera for optimal performance. These apps can guide you through the calibration process and make it easier to adjust the camera settings.
By testing and calibrating the camera after replacing it, you can ensure that your iPhone 6s Plus continues to capture high-quality photos and videos.
Reassembling the iPhone 6s Plus
Once you have successfully replaced the rear camera on your iPhone 6s Plus, it’s time to reassemble the device. Follow these steps carefully:
- Reattach the rear camera: Carefully place the new rear camera module back into its original position on the rear housing.
- Secure the camera: Use the screws you removed earlier to secure the camera in place. Make sure the screws are tightened properly but not over-tightened.
- Reconnect the camera cables: Gently reconnect the camera cables to the logic board, ensuring they are properly aligned and securely attached.
- Reinstall the rear housing: Carefully place the rear housing back onto the iPhone, ensuring all the clips snap securely into place.
- Secure the rear housing: Use the screws you removed earlier to secure the rear housing in place.
- Power on the iPhone: Once everything is reassembled, power on your iPhone 6s Plus to ensure the rear camera is functioning correctly.
By following these steps, you can successfully reassemble your iPhone 6s Plus after replacing the rear camera.
Common Issues and Troubleshooting
When dealing with the rear camera of your iPhone 6s Plus, there are some common issues that users may encounter. Here are a few of the most frequent problems and some troubleshooting tips:
1. Camera Not Focusing Properly
If your camera is having trouble focusing, try cleaning the lens with a soft, lint-free cloth. Make sure there are no obstructions blocking the lens and that your phone’s software is up to date. If the issue persists, you may need to replace the camera module.
2. Blurry or Distorted Images
If your photos are turning out blurry or distorted, check the camera settings to ensure they are optimized for the best quality. You can also try restarting your phone or resetting the camera settings to default. If the problem continues, consider replacing the camera module.
