Have you accidentally gotten water into your iPhone’s back camera? Don’t panic! Water damage can be a common issue, but there are steps you can take to potentially save your device. The back camera of your iPhone is a critical component for taking photos and videos, so it’s important to address any water damage as soon as possible.
In this article, we will guide you through the process of removing water from your iPhone’s back camera to help prevent any long-term damage. It’s crucial to act quickly and follow these steps carefully to increase the chances of saving your device.
Steps to remove water from iPhone back camera
If water has entered your iPhone’s back camera, follow these steps to remove it:
1. Turn off your iPhone immediately |
2. Remove the case and SIM card tray |
|
Power off your iPhone to prevent any short circuits and further damage. |
Take off the case and eject the SIM card tray to expose the back camera area. |
3. Use a desiccant or rice |
4. Wait for at least 48 hours |
|
Place your iPhone in a sealed bag with a desiccant packet or uncooked rice to absorb moisture. |
Let your iPhone sit in a dry place for at least 48 hours to allow the water to evaporate. |
5. Check the camera |
6. Test your iPhone |
|
After the waiting period, check if the water has been removed from the back camera lens. |
Turn on your iPhone and test the camera functionality to ensure it’s working properly. |
![AICase (2nd Gen Universal Waterproof Underwater Photography Housings for iPhone 12/12 Pro/12 Mini/12 Pro Max/11//XR/8/7/6[50ft/15m], Diving Case for Galaxy S21 5G/S21 Plus/S21 Ultra/Note 20/10/S10](https://m.media-amazon.com/images/I/51ULXTAluVS._SS520_.jpg)
Power off the device
Before attempting to remove water from your iPhone’s back camera, it is crucial to power off the device immediately. Water and electronics do not mix well, and leaving the device on could potentially cause a short circuit or further damage. To power off your iPhone, press and hold the power button until the “slide to power off” option appears on the screen. Slide the power off option to shut down the device completely.
Use silica gel packets
If your iPhone camera has water in it, you can try using silica gel packets to absorb the moisture. Silica gel packets are commonly found in packaging for electronics and other products to keep them dry. Here’s how you can use them to help dry out your camera:
Steps:
| 1. | Remove your iPhone case and any accessories. |
| 2. | Place your iPhone in a bag with several silica gel packets. |
| 3. | Seal the bag and leave it undisturbed for at least 24-48 hours. |
| 4. | After the designated time, remove your iPhone and check if the moisture has been absorbed. |
| 5. | If necessary, repeat the process until the camera is completely dry. |
Using silica gel packets can help remove moisture from your iPhone camera and prevent potential damage. Remember to be patient and allow enough time for the silica gel to work its magic.
Place the phone in rice
One common method to help remove moisture from your iPhone’s camera is to place it in a container filled with uncooked rice. Rice is known for its ability to absorb moisture, which can help dry out the camera and other internal components.
To do this, follow these steps:
- Turn off your iPhone immediately to prevent any potential damage.
- Remove the phone case and any accessories.
- Get a container that is large enough to hold your iPhone and fill it with uncooked rice.
- Place your iPhone in the container, making sure it is completely covered with rice.
- Leave your iPhone in the rice for at least 24-48 hours to allow the rice to absorb the moisture.
- After the waiting period, carefully remove your iPhone from the rice, clean off any rice particles, and turn it back on to check if the camera is working properly.
Try using a vacuum cleaner
If the water has entered your iPhone’s back camera, you can try using a vacuum cleaner to remove it. Make sure the vacuum cleaner is set to a low suction setting to avoid damaging the camera. Gently place the nozzle of the vacuum cleaner over the camera lens and turn it on. The suction should help to draw out any water that may be trapped in the camera.
Use a hairdryer on low heat
If your iPhone’s back camera is wet, you can try using a hairdryer to dry it out. Make sure to set the hairdryer on low heat to prevent any damage to the camera or other components of your phone.
Hold the hairdryer at a safe distance from the camera and gently blow warm air over the lens for a few minutes. Be careful not to overheat the phone or hold the hairdryer too close to the camera.
Consult a professional technician
If you are not comfortable attempting to remove the water from your iPhone’s camera on your own, it may be best to consult a professional technician. They will have the necessary tools and expertise to safely disassemble your device and clean out any water that may have gotten inside. While this option may cost more than DIY methods, it can provide peace of mind knowing that your iPhone is in the hands of a trained professional.
