$55.88 $59.99 Buy It Now

How to fix iphone 7 plus back camera glass

0

If you have an iPhone 7 Plus and the back camera glass is cracked or damaged, you may be wondering how to fix it. The camera glass on the back of your iPhone is important for protecting the lens and ensuring that your photos and videos come out clear and sharp. Fortunately, replacing the back camera glass on an iPhone 7 Plus is a relatively straightforward process that you can do yourself with the right tools and a little bit of patience.

In this guide, we’ll walk you through the steps to replace the back camera glass on your iPhone 7 Plus. Before you begin, make sure you have a replacement camera glass, a small screwdriver, a heat gun or hairdryer, and a suction cup tool. It’s also a good idea to work on a clean, flat surface to prevent any small parts from getting lost.

Remember to proceed with caution and take your time when replacing the back camera glass on your iPhone 7 Plus. If you’re not comfortable doing it yourself, you can always take your phone to a professional repair shop for assistance.

Step-by-step guide to fixing iPhone 7 Plus back camera glass

If the back camera glass on your iPhone 7 Plus is cracked or damaged, you can replace it yourself with a few simple tools and a replacement part. Follow these steps to fix the back camera glass on your iPhone 7 Plus:

Step 1: Gather your tools

Before you begin, make sure you have the following tools on hand:

– Replacement back camera glass

– Small Phillips screwdriver

– Opening tool (such as a plastic spudger)

– Tweezers

Step 2: Remove the old camera glass

Use the opening tool to gently pry the old camera glass away from the back of the iPhone 7 Plus. Be careful not to damage the camera lens or surrounding components.

Tip: You may need to apply heat to soften the adhesive holding the camera glass in place.

Once the old camera glass is removed, clean any adhesive residue from the phone using a cleaning solution or isopropyl alcohol.

Step 3: Install the new camera glass

Place the replacement camera glass over the camera lens on the back of the iPhone 7 Plus. Press down firmly to secure it in place.

See also  How to request access to camera on iphone

Tip: You can use a small amount of adhesive to ensure the camera glass stays in place.

Reassemble the phone by replacing any screws and reattaching the back cover.

Your iPhone 7 Plus should now have a new back camera glass that is free from cracks or damage.

Gather necessary tools and materials

Before you start fixing the back camera glass on your iPhone 7 Plus, make sure you have all the necessary tools and materials ready. Here is a list of what you will need:

Tools:

  • Phillips screwdriver – to remove the screws holding the back cover in place.
  • Prying tool – to carefully open the device without damaging it.
  • Tweezers – to handle small components and screws.
  • Cloth or microfiber cloth – to clean the back camera area.

Materials:

  • Replacement back camera glass – make sure it is compatible with the iPhone 7 Plus model.
  • Adhesive tape or glue – to securely attach the new camera glass.

Prepare the work area

Before you start fixing the back camera glass of your iPhone 7 Plus, it’s essential to prepare a clean, well-lit work area. Make sure to gather all the necessary tools and materials, such as a replacement camera glass, a screwdriver set, a heat gun or hairdryer, a suction cup, and a plastic prying tool.

Clear a flat surface and lay down a clean cloth or towel to protect your device and provide a soft surface to work on. Ensure there are no distractions and keep the area organized to prevent losing any small parts during the repair process.

Remove the back cover of the iPhone

To access the back camera glass on your iPhone 7 Plus, you first need to remove the back cover of the device. Here’s how you can do it:

Step 1: Power off your iPhone

Before starting any repair, make sure to power off your iPhone to avoid any potential damage.

Step 2: Unscrew the screws

Use a suitable screwdriver to remove the screws at the bottom of the iPhone near the charging port.

See also  Best iphone camera app with raw mode

Caution: Keep the screws in a safe place as they are small and easy to lose.

Take out the old camera glass

Step 1: Turn off your iPhone 7 Plus and remove any case or cover that may be on it.

Step 2: Use a heat gun or hair dryer to gently heat the adhesive around the camera glass. Be careful not to overheat the device.

Step 3: Once the adhesive is warm, use a suction cup to pull the old camera glass away from the back of the phone.

Step 4: If the glass doesn’t come off easily, use a thin, plastic opening tool to carefully pry it away from the phone.

Step 5: Clean any remaining adhesive residue from the back of the phone using a mild solvent and a microfiber cloth.

Step 6: Your old camera glass is now removed and you can proceed with installing the new one.

Clean the camera lens area

Before replacing the back camera glass on your iPhone 7 Plus, it is essential to ensure that the camera lens area is clean. Any dust, dirt, or smudges on the lens can affect the quality of your photos and videos. Follow these steps to properly clean the camera lens area:

Materials Needed:

  • Microfiber cloth
  • Lens cleaning solution (optional)
Step 1: Power off your iPhone 7 Plus to prevent any accidental damage to the device.
Step 2: Gently wipe the camera lens area with a dry microfiber cloth to remove any loose particles.
Step 3: If there are stubborn smudges or dirt on the lens, you can use a lens cleaning solution on the microfiber cloth to gently clean the lens.
Step 4: Ensure the lens area is completely dry before proceeding with the replacement of the back camera glass.

Install the new camera glass

Now that you have removed the old camera glass, it’s time to install the new one. Follow these steps:

  1. Take the new camera glass and carefully align it with the opening on the back of your iPhone 7 Plus.
  2. Gently press the camera glass into place, making sure it is securely attached.
  3. If the new camera glass has adhesive, remove the protective film and press firmly to ensure a strong bond.
  4. Double-check that the camera glass is properly aligned and securely installed before proceeding.
See also  How to use camera on iphone 11pro

Once the new camera glass is in place, you can reassemble your iPhone 7 Plus following the steps in reverse order. Make sure all components are properly aligned and secured before powering on your device.

Reattach the back cover of the iPhone

Once you have successfully replaced the back camera glass on your iPhone 7 Plus, it’s time to reattach the back cover to complete the repair. Follow these steps:

Step 1: Align the back cover

Place the back cover back onto the iPhone, ensuring that it is properly aligned with the edges of the device.

Step 2: Press down firmly

Gently press down on the edges of the back cover to secure it in place. Make sure all the clips and screws are in their respective positions.

Test the camera to ensure it is working properly

After replacing the back camera glass on your iPhone 7 Plus, it is crucial to test the camera to ensure it is functioning correctly. Follow these steps to perform a quick test:

  1. Open the Camera App: Launch the camera app on your iPhone 7 Plus.
  2. Switch Between Front and Back Camera: Test the switching functionality between the front and back cameras to ensure the back camera is activated.
  3. Capture a Photo: Take a picture using the back camera to check the image quality and focus.
  4. Record a Video: Record a short video clip to verify that the back camera is recording properly.
  5. Test Flash and Other Features: Check if the flash, zoom, and other camera features are working as expected.

By performing these tests, you can ensure that the back camera glass replacement was successful and that your iPhone 7 Plus camera is in working order.

Carmen J. Moore
Carmen J. Moore

Carmen J. Moore is an expert in the field of photography and videography, blending a passion for art with technical expertise. With over a decade of experience in the industry, she is recognized as a sought-after photographer and videographer capable of capturing moments and crafting unique visual narratives.

Camera Reviews
Logo