Do you have a cracked or scratched rear camera glass on your iPhone 7 Plus? Instead of replacing the entire camera module, you can opt to change just the rear camera glass. This can be a more cost-effective solution if the camera itself is working fine but the glass cover is damaged.
Changing the rear camera glass on an iPhone 7 Plus requires precision and patience, but it can be done at home with the right tools and techniques. In this guide, we will walk you through the step-by-step process of replacing the rear camera glass on your iPhone 7 Plus.
Step-by-step Guide to Replace iPhone 7 Plus Rear Camera Glass
If you have a cracked or damaged rear camera glass on your iPhone 7 Plus, you can replace it yourself with a few simple tools and this guide. Follow these steps to safely replace the rear camera glass:
- Turn off your iPhone 7 Plus and remove the two bottom screws next to the charging port using a Pentalobe screwdriver.
- Use a suction cup to lift the screen slightly, then slide a plastic pick between the screen and the frame to separate the adhesive.
- Open the screen like a book and use a Y000 screwdriver to remove the screws securing the metal bracket covering the rear camera.
- Disconnect the rear camera flex cable and carefully remove the metal bracket and rear camera module from the phone.
- Use a heat gun or hairdryer to heat the adhesive around the camera glass, then gently pry it off with a plastic pick.
- Clean the area around the camera lens and apply new adhesive to the replacement camera glass.
- Place the new camera glass in position and press down firmly to secure it in place.
- Reassemble your iPhone 7 Plus by following these steps in reverse order, then power it on to test the new rear camera glass.
With these steps, you can successfully replace the rear camera glass on your iPhone 7 Plus and restore its functionality and appearance.
Gather Necessary Tools and Materials
Before you start the process of changing the rear camera glass on your iPhone 7 Plus, make sure you have all the necessary tools and materials. Here’s what you’ll need:
Tools:
1. Phillips #000 Screwdriver: This small screwdriver is essential for removing the screws holding the back panel in place.
2. Plastic Pry Tools: You’ll need these tools to carefully pry open the back panel without damaging the phone.
3. Tweezers: Tweezers will help you handle small parts and screws with precision.
Materials:
1. Replacement Rear Camera Glass: Make sure you have a new camera glass ready to install.
2. Cleaning Cloth: To wipe off any dust or fingerprints from the camera lens before installation.
3. Adhesive Tape: You may need adhesive tape to secure the new camera glass in place.
Power Off Your iPhone 7 Plus
Before starting the process of changing the rear camera glass on your iPhone 7 Plus, make sure to power off your device. This step is essential to prevent any accidents or damage while working on the camera.
To power off your iPhone 7 Plus, press and hold the side button located on the right side of the device. You will see a “slide to power off” option on the screen. Slide the bar to turn off your iPhone completely.
Remove the Back Cover of the iPhone
To access the rear camera glass of your iPhone 7 Plus, you first need to remove the back cover of the device. Follow these steps to safely remove the back cover:
| 1. | Power off your iPhone and make sure it is disconnected from any power source. |
| 2. | Use a Pentalobe screwdriver to remove the two screws located at the bottom of the iPhone near the charging port. |
| 3. | Place a suction cup near the home button and gently lift the screen assembly to create a small gap between the screen and the back cover. |
| 4. | Slide an opening tool or a plastic card along the edge of the iPhone to release the clips securing the back cover. |
| 5. | Once the clips are released, carefully lift the back cover away from the iPhone and set it aside. |
Disassemble the Rear Camera Module
To change the rear camera glass on your iPhone 7 Plus, you will need to disassemble the rear camera module. Follow these steps:
Step 1: Remove the Rear Camera Module
Start by removing the screws that secure the rear camera module in place. Use a small Phillips screwdriver to carefully unscrew the screws.
Step 2: Disconnect the Camera Module
Once the screws are removed, gently disconnect the camera module from the phone’s motherboard. Be careful not to damage any of the connectors.
Replace the Broken Camera Glass
If the rear camera glass on your iPhone 7 Plus is broken, you can replace it yourself with a few simple steps. Here’s how:
Step 1: Gather the necessary tools, including a replacement camera glass, a heat gun or hair dryer, a suction cup, a plastic prying tool, and a small Phillips screwdriver.
Step 2: Use the heat gun or hair dryer to warm up the broken camera glass. This will soften the adhesive and make it easier to remove the glass.
Step 3: Once the adhesive is softened, use the suction cup to pull the broken glass away from the camera lens.
Step 4: Use the plastic prying tool to carefully lift the broken glass off the camera assembly.
Step 5: Clean any remaining adhesive from the camera lens and surrounding area.
Step 6: Place the new camera glass onto the camera lens and press down firmly to secure it in place.
Step 7: Reassemble your iPhone by replacing any screws and ensuring all components are properly aligned.
Step 8: Test the camera to make sure it is functioning properly before using your phone again.
By following these steps, you can easily replace the broken camera glass on your iPhone 7 Plus and restore its functionality.
Reassemble Your iPhone 7 Plus and Test the Camera
Once you have successfully replaced the rear camera glass on your iPhone 7 Plus, it’s time to reassemble the device and test the camera to ensure everything is working correctly.
Step 1: Reassemble the iPhone
Carefully reattach the connectors and screws in the reverse order you disassembled them. Make sure everything is securely in place and the cables are properly connected.
Step 2: Test the Camera
Power on your iPhone 7 Plus and open the camera app to test the rear camera. Take a few test photos and videos to check the quality and functionality of the camera. Make sure there are no issues with focus, clarity, or any other camera features.
If the camera is functioning properly, congratulations! You have successfully replaced the rear camera glass on your iPhone 7 Plus. If you encounter any issues, double-check your reassembly steps and connections, or seek professional help if needed.
