Have you accidentally cracked or shattered the glass covering the back camera of your iPhone 7 Plus? Don’t worry, you can easily replace the camera glass yourself with a few simple tools and steps. It’s important to fix this issue as soon as possible to ensure the camera functionality is not compromised.
In this guide, we will walk you through the steps to safely replace the back camera glass on your iPhone 7 Plus.
Please note that this process requires a steady hand and patience, so make sure to follow each step carefully to avoid causing any further damage to your device.
Step-by-Step Guide to Replacing iPhone 7 Plus Back Camera Glass
Replacing the back camera glass on your iPhone 7 Plus can be a delicate process, but with the right tools and careful steps, you can do it yourself. Follow this step-by-step guide to successfully replace the back camera glass on your device.
Tools Needed:
Before you begin, make sure you have the following tools ready:
| 1. Phillips screwdriver |
| 2. Spudger tool |
| 3. Replacement back camera glass |
| 4. Heat gun or hairdryer |
| 5. Tweezers |
| 6. Cleaning cloth |
Step 1: Prepare Your Workspace
Find a clean, well-lit workspace and gather all your tools. Power off your iPhone 7 Plus and remove the SIM card tray.
Step 2: Remove the Back Cover
Use a heat gun or hairdryer to warm up the adhesive around the edges of the back cover. Once the adhesive is soft, use a spudger tool to carefully pry off the back cover.
Gather Necessary Tools and Supplies
Before you start the process of changing the back camera glass on your iPhone 7 Plus, make sure you have all the necessary tools and supplies ready. Here is a list of items you will need:
- Replacement camera glass
- Small Phillips screwdriver
- Prying tool or plastic opening tool
- Heat gun or hair dryer
- Cloth or towel
- Tweezers
- Cleaning wipes or alcohol solution
Having these tools and supplies prepared will make the process smoother and ensure you have everything you need to successfully replace the back camera glass on your iPhone 7 Plus.
Power Off the Device and Remove Back Cover
Before starting the process of changing the back camera glass on your iPhone 7 Plus, make sure to power off the device to avoid any accidents or damage. To do this, press and hold the power button until the “Slide to power off” slider appears on the screen. Slide the slider to power off the device.
Once the device is powered off, you will need to remove the back cover. Use a pentalobe screwdriver to unscrew the two screws located at the bottom of the device next to the charging port. Once the screws are removed, gently slide the back cover upwards to detach it from the device.
Locate and Remove the Faulty Camera Glass
Before you begin the process of changing the back camera glass on your iPhone 7 Plus, you need to locate and remove the faulty camera glass. Follow these steps to do so:
Step 1: Gather the Necessary Tools
Make sure you have all the tools required for this task, including a small Phillips screwdriver, a plastic spudger tool, a heat gun or hairdryer, and a replacement camera glass.
Step 2: Remove the Back Cover
Use the Phillips screwdriver to remove the screws holding the back cover of your iPhone 7 Plus in place. Once the screws are removed, gently pry off the back cover using the plastic spudger tool.
| Important Note: | Be careful not to damage any of the internal components of your phone while removing the back cover. |
Clean the Camera Area and Prepare for Installation
Before installing the new back camera glass, it is important to clean the camera area thoroughly to ensure a proper fit and clear image quality. Start by using a soft microfiber cloth to gently wipe away any dust, dirt, or smudges on the camera lens and surrounding area. Be careful not to apply too much pressure, as this could scratch the lens.
Once the camera area is clean, carefully peel off the adhesive backing from the new back camera glass. Align the glass with the camera lens and gently press it into place, making sure it is securely attached. Avoid touching the adhesive side of the glass with your fingers to prevent any smudges or fingerprints.
After the back camera glass is installed, give it a final wipe with the microfiber cloth to remove any remaining debris. Your iPhone 7 Plus should now have a clean and clear back camera ready for capturing high-quality photos and videos.
Install the New Camera Glass and Reassemble the Device
Once you have successfully removed the old camera glass, it’s time to install the new one. Carefully place the new camera glass in the opening, making sure it fits snugly and is aligned correctly.
Next, reassemble your iPhone 7 Plus by following the steps in reverse order. Make sure to reconnect any cables or components you may have disconnected earlier and carefully put the screws back in place.
Caution:
Handle the new camera glass with care to avoid any fingerprints or smudges. A clean installation will ensure optimal camera performance.
Test the Camera Functionality and Ensure Proper Installation
After replacing the back camera glass on your iPhone 7 Plus, it’s crucial to test the camera functionality to ensure that it’s working properly. Here are the steps to follow:
1. Testing the Camera
Open the camera app on your iPhone and switch between the front and back cameras to check if both are functioning correctly. Take a few test photos and videos to see if the quality is good and if there are any issues with focusing or clarity.
2. Ensuring Proper Installation
Inspect the back camera area to make sure that the glass is securely in place and properly aligned with the lens. Check for any gaps or misalignments that could affect the camera’s performance. If everything looks good, your back camera glass replacement was successful!
