Are you experiencing issues with the front camera mirror on your iPhone 11? If so, you may need to replace it to ensure your selfies and video calls are crystal clear. Fortunately, changing the front camera mirror on the iPhone 11 is a relatively straightforward process that you can do at home with the right tools and a bit of patience.
In this guide, we will walk you through the steps required to replace the front camera mirror on your iPhone 11. Whether your mirror is cracked, scratched, or just not functioning properly, this tutorial will help you get your device back to its selfie-taking best in no time.
Step-by-step guide: Changing front camera mirror in iPhone 11
If you need to replace the front camera mirror on your iPhone 11, follow these step-by-step instructions to do it yourself:
Materials Needed:
- New front camera mirror
- Prying tool
- Suction cup
- Small Phillips screwdriver
Step 1: Power Off the iPhone
Make sure your iPhone is powered off before starting the repair process.
Step 2: Remove the Display
Use a suction cup and prying tool to carefully lift the display assembly off the iPhone.
Step 3: Remove the Screws
Locate and remove the screws securing the front camera module in place.
Step 4: Replace the Front Camera Mirror
Once the screws are removed, carefully lift the front camera module and replace the mirror with the new one.
Step 5: Reassemble the iPhone
Reattach the screws and carefully put the display assembly back in place. Power on your iPhone to test the new front camera mirror.
By following these steps, you can successfully change the front camera mirror in your iPhone 11.
Step 1: Gather necessary tools and materials
Before you start changing the front camera mirror on your iPhone 11, make sure you have all the necessary tools and materials ready. Here’s what you’ll need:
- Pentalobe screwdriver
- Phillips screwdriver
- Suction cup
- Spudger tool
- Replacement front camera mirror
- Clean cloth
- Adhesive strips or adhesive glue
Step 2: Power off the iPhone 11
Before you begin replacing the front camera mirror on your iPhone 11, make sure to power off the device. Press and hold the side button along with either volume button until the power off slider appears on the screen. Slide the slider to power off your iPhone 11 completely.
Step 3: Remove the display assembly
Now that the screws have been removed, carefully lift the display assembly up from the top edge. Be gentle and make sure not to damage any cables that may still be attached.
Once the display assembly is lifted, you can access the front camera mirror component. It is located near the top of the phone, usually on the right side. Take note of the position and orientation of the mirror before proceeding with the replacement.
Make sure to disconnect any cables or connectors that are securing the display assembly to the phone body. This will allow you to fully remove the assembly and access the front camera mirror for replacement.
Step 4: Locate and access the front camera mirror
Once you have removed the display assembly, you will be able to locate the front camera mirror. It is situated near the top of the phone, usually next to the earpiece speaker. Carefully inspect the area to identify the mirror.
Use a precision tool to gently detach the front camera mirror from its housing. Be cautious not to damage any surrounding components while doing this. Take your time and work slowly to ensure a safe removal process.
Step 5: Remove the damaged front camera mirror
Once you have accessed the front camera mirror, carefully remove the damaged mirror from its place. Use a flat tool or your fingers to gently pry it off the adhesive holding it in place. Be cautious not to damage any other components or the camera lens while doing this.
Make sure to discard the damaged mirror properly and clean any adhesive residue left on the camera module before proceeding to install the new mirror.
Step 6: Install the new front camera mirror
Once you have removed the old front camera mirror, carefully place the new front camera mirror in the correct position.
Make sure it is securely attached and aligned properly before proceeding to reassemble your iPhone 11.
Double-check that all the connections are secure and the new front camera mirror is functioning correctly before completing the repair process.
Step 7: Reassemble the iPhone 11
Once you have successfully replaced the front camera mirror in your iPhone 11, it’s time to reassemble the device. Follow these steps:
| 1. | Place the display assembly back onto the iPhone 11. |
| 2. | Reconnect all the cables you disconnected earlier, including the battery connector. |
| 3. | Secure the display assembly in place by tightening the screws. |
| 4. | Turn on your iPhone 11 and test the front camera to ensure it’s working properly. |
| 5. | If everything is functioning correctly, carefully snap the display back into place. |
| 6. | Finally, power off your iPhone 11 and reinsert the SIM card tray. |
