If you own a GoPro Hero 5 camera and are looking to clean or replace the lens, you may be wondering how to open the camera lens. The lens on the GoPro Hero 5 is not meant to be easily removed, but with the right tools and techniques, you can safely open it up.
Before you begin, make sure to power off the camera and remove any accessories or attachments. To open the camera lens, you will need a small screwdriver, a heat gun or hairdryer, and a suction cup. Start by heating the edges of the lens with the heat gun or hairdryer to soften the adhesive.
Next, use the suction cup to gently pull the lens away from the camera body. Be careful not to apply too much pressure, as you don’t want to damage the camera or lens. Once the lens is detached, you can clean it or replace it with a new one.
Step-by-step guide to open camera lens on GoPro Hero 5
Opening the camera lens on your GoPro Hero 5 is a simple process that allows you to clean the lens or replace it if necessary. Follow these steps to safely open the camera lens:
Step 1: Power off the GoPro Hero 5
Before opening the camera lens, make sure to power off your GoPro Hero 5 to avoid any accidental damage.
Step 2: Locate the camera lens
The camera lens on the GoPro Hero 5 is located on the front of the camera. It is a small circular lens that can be unscrewed for cleaning or replacement.
Caution: Be gentle when handling the camera lens to avoid scratching or damaging it.
By following these steps, you can safely open the camera lens on your GoPro Hero 5 and perform any necessary maintenance or replacement tasks.
Remove the battery door
To access the camera lens on your GoPro Hero 5, you will first need to remove the battery door. Follow these steps:
- Turn off your GoPro Hero 5 camera.
- Locate the latch on the bottom of the camera near the battery door.
- Slide the latch to the side to unlock the battery door.
- Gently lift the battery door to reveal the battery compartment.
- Remove the battery from the compartment by pushing it up and out.
With the battery door removed, you can now access the camera lens and make any necessary adjustments or cleanings.
Unscrew the four screws
To open the camera lens on your GoPro Hero 5, begin by unscrewing the four screws located around the lens cover. Use a small screwdriver to carefully loosen and remove each screw. Be sure to keep track of the screws so you can easily reassemble the camera lens once you have completed the necessary maintenance or repair. Once the screws are removed, gently lift off the lens cover to access the camera lens underneath.
Carefully pry open the casing
Before attempting to open the camera lens of your GoPro Hero 5, you will need to carefully pry open the casing. This step is crucial to ensure that you can access the lens without causing any damage to the camera itself.
Locate the camera lens assembly
To open the camera lens of your GoPro Hero 5, you first need to locate the camera lens assembly on the front of the camera. The camera lens assembly is the circular glass or plastic piece that covers the camera lens. It is usually located towards the top of the front of the camera, above the camera screen and buttons.
Remove the lens cover
To remove the lens cover on your GoPro Hero 5 camera, follow these steps:
- Make sure the camera is powered off to avoid any damage.
- Locate the small latch on the side of the camera near the lens cover.
- Slide the latch to unlock the lens cover.
- Gently twist the lens cover counterclockwise to unscrew it from the camera body.
- Carefully remove the lens cover and set it aside.
Now the lens cover is removed, and you can access the camera lens for cleaning or replacement.
Reassemble the camera
Once you have cleaned the lens and checked for any damages, it’s time to reassemble the camera. Follow these steps to put the camera back together:
- Insert the lens: Carefully place the lens back into its housing, making sure it is properly aligned.
- Secure the lens: Use the appropriate screws or clips to secure the lens in place.
- Reattach the front cover: Gently reattach the front cover of the camera, making sure it snaps into place.
- Test the camera: Before fully closing the camera, test the lens to ensure it is functioning properly.
- Close the camera: Once you have confirmed everything is in order, close the camera by reattaching any remaining screws or clips.
Remember to handle the camera with care to avoid causing any further damage during reassembly.
