If you own an iPhone 7 Plus and are experiencing issues with the back camera lens, you may need to remove it for cleaning or replacement. The back camera lens on the iPhone 7 Plus is a delicate component that can easily get scratched or damaged, affecting the quality of your photos and videos. Fortunately, with the right tools and a careful approach, you can remove the back camera lens of your iPhone 7 Plus safely and effectively.
Before you begin: Make sure to power off your iPhone 7 Plus and remove any protective case or cover. You will need a small Phillips screwdriver, a suction cup, a plastic opening tool, and a replacement camera lens (if you are planning to replace it).
Step-by-step guide on removing back camera lens of iPhone 7 Plus
If you need to remove the back camera lens of your iPhone 7 Plus, follow these steps carefully:
Step 1: Power off your iPhone and make sure it is unplugged from any power source.
Step 2: Use a Pentalobe screwdriver to remove the two screws located on either side of the charging port.
Step 3: Place a suction cup near the Home button and gently pull to create a small gap between the screen and the rear case.
Step 4: Slide an opening pick between the screen and rear case to separate the adhesive holding them together. Be careful not to damage the cables near the top of the phone.
Step 5: Lift the screen to a 90-degree angle and support it with something to keep it in place.
Step 6: Locate the back camera lens module on the rear case. It is the circular component with a glass lens.
Step 7: Use a small screwdriver to gently pry the back camera lens module from the rear case. Be cautious not to damage the surrounding components.
Step 8: Once the back camera lens module is removed, you can replace it with a new one or clean the existing one as needed.
Step 9: Carefully reassemble your iPhone by following the steps in reverse order. Make sure to test the camera functionality before fully securing the rear case.
Remember to proceed with caution and seek professional help if you are unsure about any step.
Gather necessary tools
Before you start removing the back camera lens of your iPhone 7 Plus, make sure you have all the necessary tools handy. Here are the tools you will need:
- Small Phillips screwdriver
- Suction cup
- Plastic spudger tool
- Tweezers
- Replacement camera lens (if needed)
Power off your iPhone 7 Plus
Before you start removing the back camera lens of your iPhone 7 Plus, make sure to power off the device to prevent any damage or accidents. Follow these steps to power off your iPhone 7 Plus:
- Press and hold the Power button located on the right side of your iPhone.
- Slide the “slide to power off” option that appears on the screen to turn off your device.
- Wait for your iPhone 7 Plus to completely power off before proceeding with the camera lens removal process.
Remove the screws on the bottom of the phone
Step 1: Lay your iPhone 7 Plus on a flat surface with the screen facing down.
Step 2: Use a Pentalobe screwdriver to remove the two screws located on either side of the charging port at the bottom of the phone.
Step 3: Place the screws in a safe place where you won’t lose them.
Step 4: Once the screws are removed, you can proceed to the next step of removing the back camera lens of your iPhone 7 Plus.
Use a suction cup to lift the screen
Before you start removing the back camera lens of your iPhone 7 Plus, you need to open the device. One way to do this is by using a suction cup to lift the screen.
Place the suction cup near the Home button and gently pull the suction cup upward, creating a small gap between the screen and the body of the phone. Be careful not to pull too hard or fast to avoid damaging the screen.
Once you have created a small gap, insert a plastic pick or a thin tool into the gap to keep it open while you work on removing the back camera lens.
Disconnect the cables inside the phone
Before removing the back camera lens of your iPhone 7 Plus, you need to disconnect the cables inside the phone to ensure a safe disassembly process. Here’s how to do it:
- Turn off your iPhone and remove the SIM card tray.
- Use a pentalobe screwdriver to remove the two screws located at the bottom of the phone.
- Apply a suction cup near the home button and gently pull to lift the screen a bit.
- Use a spudger tool to carefully disconnect the battery cable, display cable, and digitizer cable.
- Once the cables are disconnected, you can proceed with removing the back camera lens following the steps provided.
Locate the back camera lense
To begin the process of removing the back camera lens on your iPhone 7 Plus, you first need to locate the lens itself. The camera lens is located on the back of the phone, towards the top left corner. It is a small circular glass piece that protrudes slightly from the phone’s body. Make sure to handle the phone carefully and avoid touching the lens directly to prevent any smudges or damage.
Carefully remove the back camera lense
Removing the back camera lens of an iPhone 7 Plus requires precision and care to avoid damaging the delicate components. Follow these steps to safely remove the lens:
- Start by powering off the iPhone and removing any protective case or cover.
- Use a small screwdriver or a suction cup to carefully lift the back cover of the phone.
- Locate the back camera lens module, which is usually located near the top of the phone.
- Using a specialized tool or a gentle prying motion, carefully remove the lens from its housing.
- Be cautious not to apply too much force or pressure, as this could damage the lens or the camera module.
- Once the lens is detached, inspect it for any dirt or debris and clean it using a soft cloth or lens cleaning solution.
- Before reattaching the lens, ensure that the camera module and the surrounding area are free of any dust or particles.
- Gently place the lens back into its housing and press down to secure it in place.
- Finally, reassemble the phone by attaching the back cover and powering it back on to test the camera functionality.
